you are in: Products; AC Gearmotors > ZF Series < back

ZF Series

A compact, powerful, quiet gearmotor available
with a high starting or high running torque
shaded pole motor. Also available with the PSC
reversing motor. Thru-case mounting and die
cast covers offer numerous mounting options.
The model ZF is designed for additional "swing
distance" of clearance between motor-side shaft
extension and the motor.


Torque: Up to 100 inch lbs. (11.3 Nm)
Speed: 1 to 200 rpm*

Description

Type: Zinc die cast AC gearmotor
Output speeds: 1 to 200 rpm*
Voltage: 24v - 230v, 60Hz
Bearings: Self-aligning sintered bronze with large
                  oil reservoir
Termination: Spade terminals or leads
Protection: Impedance or thermally protected
Duty Cycle: Intermittent or continuous
Motors Available: 3400, 3700, 4500
Rotation: Unidirectional; PSC-Reversing (RFS)
Covers: Stamped steel or die cast

Typical Applications

Oil skimmers · Instrumentation · Controls
· Laminators · Fitness equipment

Optional Features

Customized output shafts (see output shaft
section) · Double shaft extension · Various lead
lengths, termination and custom harnesses
· Cone brake (3400 and 3700), Positive stop brake
(3700 and 4500) and Coil spring brake
(see accessories section) · Needle bearings for
high radial loads · Deep case for higher torque
applications · Cooling fan · Various mounting
options · Tapped windings (3700 and 4500)
· 50 Hz · UL, CSA, CE

*Note: Speed and torque combinations will vary depending on the motor/gearbox combination.


you are in: Products; AC Gearmotors > ZF Series < back