products

GF Series

This rugged line of gearmotors was designed and engineered for low noise and long life. This is a versatile series and offers a wide choice of gear reductions and materials for accurate application and trouble-free operation.

Torque: Up to 300 inch lbs. (34Nm)
Speed: 1 to 200 rpm*
.

Description

Type: Zinc die cast AC gearmotor
Output speeds: 1 to 200 rpm*
1/2" diameter output shaft standard
Voltage: 24v - 230v, 60Hz
Bearings: Self-aligning sintered bronze with large
oil reservoir
Termination: Spade terminals or leads
Protection: Impedance or thermally protected
Duty Cycle: Intermittent or continuous
Motors Available: 3400, 3700, 4500
Rotation: Unidirectional; PSC-Reversing (GFS)
Cover: Die cast

Typical Applications

Commercial water softeners · Restaurant and
food equipment · Switch gear · Pellet stoves
· Packaging equipment · Gaming · Coffee
brewing systems · Valve actuators · Appliances
· Ventilation equipment

Optional Features

Customized output shafts (see output
shaft section) · Double output shaft extension
· Various lead lengths, termination and
custom harnesses · Cone brake (3400 and 3700),
Positive stop brake (3700 and 4500) and Coil spring brake
(see accessories section) · Needle bearings for
high radial loads · Various mounting options
including a wide selection of mounting boss
options and through-case mounting · Cooling
fan · Tapped windings (3700 and 4500)
· 50 Hz · UL, CSA, CE

*Note: Speed and torque combinations will vary depending on the motor/gearbox combination.