products

ZF Series

A compact, powerful, quiet gearmotor available
with a broad selection of DC motors.
Thru-case mounting and die cast covers offer
numerous mounting options. The model ZF is
designed for additional "swing distance" of
clearance between motor-side shaft extension
and the motor.

Torque: Up to 100 inch lbs. (11.3 Nm)
Speed: 1 to 200 rpm*

Description

Type: Zinc die cast DC gearmotor
Output speeds: 1 to 200 rpm*
Voltage: Windings up to 48 vdc; 12 and 24 vdc
standard
Bearings: Self-aligning sintered bronze with large
oil reservoir
Termination: Spade terminals or leads
Duty Cycle: Intermittent or continuous
Motors Available: 2500 series, LY
Rotation: Reversible
Cover: Stamped steel or die cast

Typical Applications

Printing equipment · Laboratory equipment
· Agricultural equipment · Banking equipment
· Refrigeration equipment · Amusement and
gaming · Medical equipment · Pumps
· Food processing equipment · Vending
· Heating and A/C equipment

Optional Features

Customized output shafts (see output shaft
section) · Double output shaft extension
· Various lead lengths, termination and custom
harnesses · Needle bearings for high radial loads
· Various mounting options · Replaceable brushes
on the 2500 series motor · Class B (130C) or
Class F (155C) armature insulation · Ball bearings
in the motor for longer life · EMI filtering for electronic
motor controls · RFI varistor to reduce conducted
emissions available on 2500 series and LY
· Encoders/tachometers (see accessories section)

*Note: Speed and torque combinations will vary depending on the motor/gearbox combination.

Caution: Use appropriate torque limiting device (e.g. slip clutch) when applying gearmotors with high reduction
ratios as the available torque can exceed gearbox rating.