products

PF Series

The PF Series provides maximum power and is ideal when limited space is a requirement. The PF offers convenient center shaft location.

Torque: Up to 100 inch lbs. (11.3 Nm)
Speed: 1 to 300 rpm*

Description

Type: Zinc die cast DC gearmotor
Output speeds: 1 to 300 rpm*
Voltage: Windings up to 48 vdc; 12 and 24 vdc
standard
Bearings: Self-aligning sintered bronze with large
oil reservoir
Termination: Spade terminals or leads
Duty Cycle: Intermittent or continuous
Motors Available: 2500 series only
Rotation: Reversible

Typical Applications

Displays · Packaging equipment · Laminators
· Pumps · Conveyor Toasters

Optional Features

Customized output shafts (see output shaft
section) · Two cover hub diameters available:
.625, .875 · Various lead lengths, termination and
custom harnesses · Needle bearing (cover side
only) for high radial loads · Base mounting
· Replaceable brushes · Ball bearings in the
motor for longer life · EMI filtering for
electronic motor controls · RFI varistor
to reduce conducted emissions · Encoders/
tachometers (see accessories section)

*Note: Speed and torque combinations will vary depending on the motor/gearbox combination.

Caution: Use appropriate torque limiting device (e.g. slip clutch) when applying gearmotors with high reduction
ratios as the available torque can exceed gearbox rating.