you are in: Products; DC Gearmotors > Model E Series < back

Model E



Description

Type: Zinc die cast inline DC gearmotor
Output speeds: 1 to 1000 rpm*
Voltage: Windings up to 48 vdc; 12 and 24 vdc
                standard
Bearings: Self-aligning sintered bronze
Termination: Spade terminals or leads 
                       (EY leads only)
Duty Cycle: Intermittent
Motors Available: EY, 2500 series, LY,
500 series, 300 series
Rotation: Reversible
Diameter: 1.50" (38.1 mm)
Torque: Up to 15 inch lbs. (1.70 Nm)
Speed: 1 to 1000 rpm*

Typical Applications

Vending machines ˇ Crane games
ˇ Medical equipment ˇ Banking equipment
ˇ Instrumentation ˇ Ticket dispensers
ˇ Lottery machines ˇ Juke boxes

Optional Features

Customized output shafts (see output shaft
section) ˇ Various lead lengths, termination and
custom harnesses ˇ Class "B" (130ēC) or
Class "F" (155ēC) armature insulation ˇ EMI
filtering for electronic motor controls
ˇ RFI varistor to reduce conducted emissions
available on 2500 series and LY
ˇ Encoders/tachometers (see accessories
section)

*Note: Speed and torque combinations will vary depending on the motor/gearbox combination.

Caution: Use appropriate torque limiting device (e.g. slip clutch) when applying gearmotors with high reduction
ratios as the available torque can exceed gearbox rating.




you are in: Products; DC Gearmotors > Model E Series < back