Description

Type: Zinc die cast inline DC gearmotor
Output speeds: 1 to 1000 rpm*
Voltage: Windings up to 48 vdc; 12 and 24 vdc
               standard
Bearings: Self-aligning sintered bronze
Termination: Spade terminals or leads (EY and
                      CY leads only)
Duty Cycle: Intermittent
Motors Available: EY, 2500 series, LY, CY ,
500 series, 300 series
Rotation: Reversible

Typical Applications

Optional Features

Customized output shafts (see output shaft
section) · Various lead lengths, termination and
custom harnesses · Needle bearings for high
radial loads · Ball bearings in the motor for longer
life · Class "B" (130ºC) or Class "F" (155ºC)
armature insulation · EMI filtering for electronic
motor controls · RFI varistor to reduce
conducted emissions available on 2500 series
and LY · Encoders/tachometers (see accessories
section)

*Note: Speed and torque combinations will vary depending on the motor/gearbox combination.

Caution: Use appropriate torque limiting device (e.g. slip clutch) when applying gearmotors with high reduction
ratios as the available torque can exceed gearbox rating.