you are in: Products; AC Gearmotors > KF Series < back

KF Series

The KF Series of gearmotors was especially designed for quiet operation... ideally suited for noise-sensitive applications. A low cost gearmotor providing design flexibility for limited space requirements. Various "stack" heights are available for varying size and space specifications.




Torque: Up to 50 inch lbs.(5.7 Nm)
Speed: 14 to 600 rpm* 

Description

Type: Zinc die cast AC gearmotor
Output Speeds: 14-600 rpm*
Voltage:24v - 230v, 60Hz
Bearings: Self-aligning sintered bronze with large oil reservior
Termination: Spade terminals or leads
Protection: Impedance or thermally protected
Duty Cycle: Intermittent or continuous
Motors Available: 3400, 3700, 4500
Rotation: Unidirectional; PSC-Reversing (KFS)
Covers: Stamped steel or die cast

Typical Applications

Copiers· Office equipment · Ingredient motor
· Laminators · Turntables · Pumps · Controls

Optional Features

Customized output shafts (see output shaft
section) · Various lead lengths, terminals, and
custom harnesses · Cone brake (3400 and 3700)
· Positive stop brake (3700 and 4500) and Coil
spring brake (see accessories section) ·  Needle
bearings for high radial loads

*Note: Speed and torque combinations will vary depending on the motor/gearbox combination.



you are in: Products; AC Gearmotors > KF Series < back