products

KF Series

The KF Series of gearmotors was especially designed for quiet operation… ideally suited for noise-sensitive applications. A low cost gearmotor providing design flexibility for limited space requirements.

Torque: Up to 50 inch lbs. (5.65 Nm)
Speed: 14 to 600 rpm*
.

Description

Type: Zinc die cast DC gearmotor
Output speeds: 14 to 600 rpm*
Voltage: Windings up to 48 vdc; 12 and 24 vdc
standard
Bearings: Self-aligning sintered bronze with large
oil reservoir
Termination: Spade terminals or leads
Duty Cycle: Intermittent or continuous
Motors Available: Motors Available: 2500 series, LY, 500 series, 300 series
Rotation: Reversible
Covers: Stamped steel or die cast

Typical Applications

Coin handling · Pumps · Medical equipment
· Bill validators · Lubrication systems
· Refrigeration systems · Phone card vending
· Juice machines · Agricultural equipment

Optional Features

Customized output shafts (see output shaft
section) · Various lead lengths, termination and
custom harnesses · Needle bearings for high
radial loads · Various mounting options
· Replaceable brushes on the 2500 series motor
· Class B (130°C) or Class F (155°C) armature
insulation · Ball bearings in the motor for longer
life · EMI filtering for electronic motor controls
· RFI varistor to reduce conducted emissions
available on 2500 series and LY
· Encoders/tachometers (see accessories section)

*Note: Speed and torque combinations will vary depending on the motor/gearbox combination.

Caution: Use appropriate torque limiting device (e.g. slip clutch) when applying gearmotors with high reduction
ratios as the available torque can exceed gearbox rating.