products

JF Series

The "slimline" design means greater application flexibility. The JF Series of gearmotors was designed for quiet, versatile and dependable performance. An economical package for low life-cycle cost.

Torque: Up to 50 inch lbs. (5.65 Nm)
Speed: 1 to 200 rpm*
.

Description

Type: Zinc die cast DC gearmotor
Output speeds: 1 to 200 rpm*
Voltage: Windings up to 48 vdc; 12 and 24 vdc
standard
Bearings: Self-aligning sintered bronze with large
oil reservoir
Termination: Spade terminals or leads
Duty Cycle: Intermittent or continuous
Motors Available: Motors Available: 2500 series, LY, 500 series, 300 series
Rotation: Reversible
Covers: Stamped steel only

Typical Applications

Security systems · Crane games · Pumps

Optional Features

Customized output shafts (see output shaft
section) · Double output shaft extension
· Various lead lengths, termination and custom
harnesses · Needle bearings for high
radial loads · Replaceable brushes on the 2500
series motor · Class B (130°C) or Class F
(155°C) armature insulation · Ball bearings
in the motor for longer life · EMI filtering
for electronic motor controls
· RFI varistor to reduce conducted emissions
available on 2500 series and LY · Encoders/
tachometers (see accessories section)

*Note: Speed and torque combinations will vary depending on the motor/gearbox combination.

Caution: Use appropriate torque limiting device (e.g. slip clutch) when applying gearmotors with high reduction
ratios as the available torque can exceed gearbox rating.