products

GF Series

This rugged line of gearmotors was designed and engineered for low noise and long life. This is a versatile series and offers a wide choice of gear reductions and materials for accurate application and trouble-free operation.

Torque: Up to 300 inch lbs. (34 Nm)
Speed: 1 to 200 rpm*
.

Description

Type: Zinc die cast DC gearmotor
Output speeds: 1 to 200 rpm*
1/2" diameter output shaft standard
Voltage: Windings up to 48 vdc; 12 and 24 vdc
standard
Bearings: Self-aligning sintered bronze with large
oil reservoir
Termination: Spade terminals or leads
(CY leads only)
Duty Cycle: Intermittent or continuous
Motors Available: Motors Available: 2500 series, LY, CY , 500 series, 300 series
Rotation: Reversible
Cover: Die cast

Typical Applications

Gaming equipment · Ticket systems · Switch
gear · Lubrication systems · Refrigeration
systems · Pellet stoves · Valve actuators
· Vending · Food equipment · Agricultural
equipment · Pumps · Production machinery

Optional Features

Customized output shafts (see output shaft
section) · Double output shaft extension
· Various lead lengths, termination and custom
harnesses · Needle bearings for high radial loads
· Various mounting options including a wide
selection of mounting boss options and through-
case mounting · Replaceable brushes on the 2500
series motor · Class B (130°C) or Class F (155°C)
armature insulation · Ball bearings in the motor
for longer life · EMI filtering for electronic
motor controls · RFI varistor to reduce conducted
emissions available on 2500 series and LY
· Encoders/tachometers (see accessories section)

*Note: Speed and torque combinations will vary depending on the motor/gearbox combination.

Caution: Use appropriate torque limiting device (e.g. slip clutch) when applying gearmotors with high reduction
ratios as the available torque can exceed gearbox rating.